The GPM-Eliminator™ Pump.
Durable. Reliable. Dependable.

Our GPM-Eliminator pump is often used some of the toughest industries out there. With submersible, horizontal, vertical, mixer, extended shaft and explosion-proof pump models, the GPM-Eliminator can tackle anything you throw at it. Find the pump you need by browsing our available models below.

Submersible Pumps

Submersible Pumps

Submersible Mixer Pumps

Submersible Mixer Pumps

Extended Shaft Pumps

Extended Shaft Pumps

Vertical Pumps

Vertical Pumps

Horizontal Pumps

Horizontal Pumps

Explosion Proof Pumps

Explosion Proof Pumps

Submersible Pumps

GPM-Eliminator submersible pumps are built for the toughest applications.

All submersible GPM-Eliminator pumps come standard with the following features:

  • 28% high-chrome, 650+ Brinell hardness wet-end materials
  • Dual SiC vs. SiC mechanical seals
  • Inverter duty motor, Class H (180°C) winding insulation
  • Casing sprayholes for slurry agitation
  • 33′ Cable
  • 416SS shaft construction

Available options:

  • All stainless steel construction
  • Shaft agitator for thick slurries
  • Longer cable lengths
  • Various shaft alloys (304SST, 316SST)
  • Non-sprayhole casings
TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
SubmersibleelectricLH34001402.53-8
SubmersibleelectricEW60003503.253-8
SubmersibleelectricGT340030032-4
SubmersibleelectricFR1500032032-18
SubmersiblehydraulicLH34001402.53-8
SubmersiblehydraulicEW60003503.253-8
SubmersiblehydraulicGT250024033-4

Submersible Mixer Pumps

GPM-Eliminator submersible mixer pumps are built to withstand the toughest applications. Whether you need to mix slurry or agitate nuclear waste, our mixer pump is up to the job.

All pumps come standard with the following features:

  • CD4MCu wet-end materials
  • Dual SiC vs. SiC mechanical seals
  • 316SS shaft construction
  • Class N insulated motors
  • Model: SBMX2S200-4T4-15.0
  • Part Number: G24722
TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
MixerelectricMX19501600.382

Extended Shaft Series Pumps

GPM-Eliminator™ extended shaft pumps are designed and built with the same Made Tough™ quality and reliability that you’ve come to expect from GPM, Inc. Not all applications are designed for submersible pumps, so depending on sump temperature,pH levels, explosion proof requirements and hydraulic conditions, the wide range of GPM-Eliminator™ extended shaft pump options are engineered and built to handle your toughest applications.

Typical Applications:

  • Mining collection sumps
  • Lime transfer
  • Metal wash sumps
  • Coke quench sumps
  • Condensate
  • Flue gas desulfurization
  • Ash transfer
  • Dredging
  • Wash down
  • Thickener underflow
  • Drywell
  • Bottom ash
  • Tailings pond
  • Coal transfer
  • Mill scale
  • Dewatering

Design Features Include:

Carrier Bearing Arrangement *

  • Less shaft deflection than cantilever pumps
  • Longer pump options
  • Permanently lubricated and sealed bearing
  • Standard or custom length pumps up to 15’

*may vary by model

Carrier/Mechanical Seal Arrangement

  • Bearing support near seal and impeller
  • Lower L3/D4 compared to cantilever pumps
  • Lubricated double mechanical seal reservoir
  • SiC vs SiC mechanical seal faces
  • No seal flushing required
  • Run dry capabilities

Other Available Options:

  • Standard or customized sole plates
  • C-face, belt drive and hydraulic driver options
  • Explosion proof
  • Flows up to 20,000gpm
  • Discharge sizes up to 20”
  • Spray hole agitation
  • Metallurgical options including Cast Iron, Stainless Steel, High-Chrome, Cd4MCu
  • Heads up to 500’
TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
Base Mounted Belt DriveelectricLH34001402.53-8
Base Mounted Belt DriveelectricEW60003503.253-8
Base Mounted C-FaceelectricLH34001402.53-8
Base Mounted C-FaceelectricEW60003503.253-8
Base Mounted C-FaceelectricGT300030032-6
Belt or C-face driveelectric or hydraulicCustom200005004.5up to 20

Vertical Pumps

GPM-Eliminator™ vertical pumps are built for the toughest applications. Dry pit monobloc models for areas prone to flooding.

All pumps come standard with the following features:

  • 28% high-chrome, 650+ Brinell hardness wet-end materials
  • Dual SiC vs. SiC mechanical seals
  • 416SS shaft construction
  • 316SS wet-end hardware

Available options:

  • All stainless steel construction
  • Various shaft alloys (304SS, 316SS)
TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
Vertical C-FaceelectricLH34001402.53-8
Vertical C-FaceelectricEW60003503.253-8
Vertical MonoBlocelectricLH34001402.53-8
Vertical MonoBlocelectricEW60003503.253-8
Vertical MonoBlocelectricGT340030032-4
Vertical C-Face electricGT340030032-4

Horizontal Pumps

GPM-Eliminator™ horizontal pumps are built for the toughest applications.

All pumps come standard with the following features:

  • 28% high-chrome, 650+ Brinell hardness wet-end materials
  • Dual SiC vs. SiC mechanical seals
  • 416SS shaft construction
  • 18-8 wet-end hardware

Available options:

  • All stainless steel construction
  • Various shaft alloys (304SS, 316SS)

 

TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
Horizontal Belt DriveelectricLH34001402.53-8
Horizontal Belt DriveelectricEW60003503.253-8
Standard HorizontalelectricLH34001402.53-8
Standard HorizontalelectricEW60003503.253-8
MonoblocelectricLH60001402.53-8
MonoblocelectricEW60003503.253-8
Horizontal Belt DriveelectricGT340030032-4
Standard HorizontalelectricGT340030032-4
MonoblocelectricGT340030032-4

Explosion Proof Pumps

GPM-Eliminator™ explosion-proof pumps are built to UL Class I, Div. I, Group D standards and supplied in GT and LH models.

All pumps come standard with the following features:

  • 28% high-chrome, 650+ Brinell hardness wet-end materials
  • Dual SiC vs. SiC mechanical seals
  • Inverter duty motor, Class H (180°C) winding insulation
  • Casing sprayholes for slurry agitation
  • 33′ Cable
  • 416SS shaft construction

Available options:

  • Shaft agitator for thick slurries
  • Longer cable lengths
  • Non-sprayhole casings
TypeDriverModelMax Flow (USGPM)Head (Ft) @ Max FlowMax Solids Diameter (In)Discharge Size (In)Download Spec Sheet (PDF)
electricEW34002.5